Honeywell Elster IN-Z61 & BKG-EPULSE Pulse Transmitters
IN-Z61 Pulse Sensor / Terminal Block (requires field wiring cable)
£28.74
Skip to product information
Download Technical Datasheet (PDF)
Honeywell Elster IN-Z61 & BKG-EPULSE Pulse Transmitters
£28.74
UK Mainland
Trade Carriage:
Parcels ≤ 20kg:
£15.00
|
Heavy Pallet > 20kg:
£65.00
(Calculated by total weight at checkout • ex-VAT)
The Honeywell Elster Pulse Transmitter Units (IN-Z61 & BKG-EPULSE) are retrofittable pulse generation sensors specifically designed for Honeywell Elster BK-G Series diaphragm gas meters (G4 to G100). Engineered to clip directly into the counter index head without disturbing metrological seals, these transmitters provide clean volt-free pulse outputs for automated meter reading (AMR), data loggers, and Building Management Systems (BMS).
Key Engineering Highlights:
- Non-Intrusive Clip-on Installation: Slots directly into the meter index window without depressurising pipework or breaking calibration wire seals.
- Volt-Free Contact Output: Standard reed switch contact compatible with digital inputs on Trend, Tridium, Siemens, Schneider, and Cylon controllers.
- Integrated Tamper Detection: Features anti-fraud loop contact to detect unauthorized cable detachment or magnetic interference.
- Industrial Cable Leads: Available as terminal block unit (IN-Z61) or pre-wired with 2-metre industrial PVC lead (BKG-EPULSE).
Technical Specifications
| Sensor Type | Low-Frequency (LF) Magnetic Reed Switch / Electronic Pulse Sensor |
| Compatibility | Honeywell Elster BK-G4, G6, G10, G16, G25, G40, G65, G100 & U-Series |
| Contact Rating | Max 24V DC / 0.1A (Volt-free normally open contact) |
| Ingress Protection | IP65 Weatherproof for indoor and external meter cabinet installation |
Standards & Building Compliance
- Meets UK Building Regulations Part L and CIBSE TM39 pulse submetering guidelines
- Approved for intrinsically safe hazardous area installations via standard ATEX galvanic barriers